Table of Contents
Advertisement
Input format and unit of TNC functions
Positions, coordinates, circle radii, chamfer
lengths
Circle radii
Tool numbers
Tool names
Delta values for tool compensation
Spindle speeds
Feed rates
Dwell time in Cycle 9
Thread pitch in various cycles
Angle of spindle orientation
Angle for polar coordinates, rotation, tilting
the working plane
Polar coordinate angle for helical
interpolation (CP)
Datum numbers in Cycle 7
Scaling factor in Cycles 11 and 26
Miscellaneous functions M
Q parameter numbers
Q parameter values
Labels (LBL) for program jumps
Labels (LBL) for program jumps
Number of program section repeats REP
Error number with Q parameter function
FN14
Spline parameter K
Exponent for spline parameter
Surface-normal vectors N and T with 3-D
compensation
602
–99 999.9999 to +99 999.9999
(5.4: places before and after the decimal point) [mm]
–99 999.9999 to +99 999.9999 if values are entered directly, radii up to
210 m possible via Q parameter programming
(5.4: places before and after the decimal point) [mm]
0 to 32 767.9 (5.1)
16 characters, enclosed by quotation marks with TOOL CALL. Permitted
special characters: #, $, %, &, -
–99.9999 to +99.9999 (2.4) [mm]
0 to 99 999.999 (5.3) [rpm]
0 to 99 999.999 (5.3) [mm/min] or [mm/tooth] or [mm/rev]
0 to 3600.000 (4.3) [s]
–99.9999 to +99.9999 (2.4) [mm]
0 to 360.0000 (3.4) [°]
–360.0000 to +360.0000 (3.4) [°]
–99 999.9999 to +99 999.9999 (5.4) [°]
0 to 2999 (4.0)
0.000 001 to 99.999 999 (2.6)
0 to 999 (3.0)
0 to 1999 (4.0)
–999 999 999 to +999 999 999 (9 digits, floating point)
0 to 999 (3.0)
Any text string in quotes ("")
1 to 65 534 (5.0)
0 to 1099 (4.0)
–9.999 9999 to +9.999 9999 (1.7)
–255 to 255 (3.0)
–9.9999999 to +9.9999999 (1.7)
Tables and Overviews
Hide quick links:
Advertisement
Table of Contents
