Output; Sorting Options; Stapling Options - Xerox Document Centre 240 Reference Manual

Output

Sorting options

Select Collated if you want your output stacked in sets to match the
sequence of your originals. Depending on the machine
configuration you can direct the output to the Top Tray or to the
Main Tray. Select Uncollated if you want your output sorted into
stacks of individual pages. Uncollated output is delivered to the tray
as defined by the System Administrator.
Collated Uncollated

Stapling options

If your Document Centre is equipped with a Finisher, you will see
the stapling options; otherwise, stapling options will not be visible.
Collated sets of up to 50 sheets can be stapled.
Single pages, or sets of more than 50 sheets will not be stapled.
For additional stapling information refer to the Paper and Stock
Chapter, page 13-4.
Xerox Document Centre Reference Guide
When using the Document
Glass the edge shown will be
stapled.
When using the Document
Feeder the edge shown will be
stapled.
Page 4 - 3