Attaching The Cisco Unified Ip Phone Expansion Module 7914 (Sccp Phones Only) - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Attaching the Cisco Unified IP Phone Expansion
Module 7914 (SCCP Phones Only)
Step 1
Step 2
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01

Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)

Related Topics
Adjusting the Placement of the Cisco Unified IP Phone, page 3-13
•
Verifying the Phone Startup Process, page 3-16
•
Configuring Startup Network Settings, page 3-18
•
Configuring Security on the Cisco Unified IP Phone, page 3-18
•
The Cisco Unified IP Phone Expansion Module 7914 attaches to a Cisco Unified
IP Phone 7961G and 7961G-GE to extend the number or line appearances or
programmable buttons on your phone. You can customize the button templates for
the Cisco Unified IP Phone Expansion Module 7914 to determine the number of
line appearances and speed dial buttons. See the
Templates" section on page 5-27
You can attach a Cisco Unified IP Phone Expansion Module 7914 to the
Cisco Unified IP Phone 7961G and 7961G-GE by using one of the following
methods:
When you initially add the phone to Cisco Unified Communications
•
Manager, you can choose 7914 14-Button Line Expansion Module in the
Module 1 or Module 2 fields and then choose the appropriate expansion
module firmware. See
After the phone is configured in Cisco Unified Communications Manager.
•
To configure the Cisco Unified IP Phone Expansion Module 7914 on the
Cisco Unified IP Phone, follow these steps:
Procedure
Log in to Cisco Unified Communications Manager Administration.
Cisco Unified Communications Manager Administration window displays.
From the menu, choose Device > Phone.
"Modifying Phone Button
for details.
Step 6 in the following procedure.
3-11