Cisco 7941G - Unified IP Phone VoIP Administration Manual page 124

Device Configuration Menu
Table 4-9 UI Configuration Menu Options (continued)
Option Description
Reverting Focus Indicates whether the phone shifts the
Priority call focus on the phone screen to an
incoming call or a reverting hold call.
Settings include:
Lower—Focus priority given to
incoming calls.
Higher —Focus priority given to
reverting calls.
Even —Focus priority given to the first
call.
Auto Call Select Indicates whether the phone
automatically shifts the call focus to an
incoming call on the same line when
the user is already on a call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all
automatic focus changes, including
Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
"more" Softkey Indicates the number of seconds that
Timer additional softkeys are displayed after
the user presses more. If this timer
expires before the user presses another
softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
4-28
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified Communications
Manager Administration,
System > Device Pool
From Cisco Unified Communications
Manager Administration,
Device > Phone >
Phone Configuration.
From Cisco Unified Communications
Manager Administration,
Device > Phone >
Phone Configuration.
OL-14620-01