Audio Quality Subjective To The User; Connecting A Headset; Disabling A Headset; Using External Devices With Your Cisco Unified Ip Phone - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Understanding the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Components

Audio Quality Subjective to the User

Connecting a Headset

Disabling a Headset

Using External Devices with Your Cisco Unified IP Phone

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
3-6
Beyond the physical, mechanical and technical performance, the audio portion of
a headset must sound good to the user and the party on the far end. Sound is
subjective and Cisco cannot guarantee the performance of any headsets or
handsets, but some of the headsets and handsets on the sites listed below have
been reported to perform well on Cisco Unified IP Phones.
Nevertheless, it is ultimately still the customer's responsibility to test this
equipment in their own environment to determine suitable performance. For
information about headsets, For information about headsets, refer to:
http://www.vxicorp.com/cisco
http://www.plantronics.com
http://www.jabra.com
To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port
on the back of the phone. Press the Headset button on the phone to place and
answer calls using the headset.
You can use the headset with all of the features on the Cisco Unified IP Phone,
including the Volume and Mute buttons. Use these buttons to adjust the ear piece
volume and to mute the speech path from the headset microphone.
You can disable the headset by using Cisco Unified Communications Manager
Administration. If you do so, you also will disable the speakerphone.
To disable the headset from Cisco Unified Communications Manager
Administration, choose Device > Phone and locate the phone that you want to
modify. In the Phone Configuration window for the phone, check the Disable
Speakerphone and Headset check box.
The following information applies when you use external devices with the
Cisco Unified IP Phone:
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-14620-01