Setting Up Services - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users

Setting Up Services

Note
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
The Services button on the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE gives users access to Cisco Unified IP Phone Services. You
can also assign services to the programmable buttons on the phone (refer to Cisco
Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Phone Guide for
more information). These services comprise XML applications that enable the
display of interactive content with text and graphics on the phone. Examples of
services include local movie times, stock quotes, and weather reports.
Before a user can access any service:
You must use Cisco Unified Communications Manager Administration to
•
configure available services.
The user must subscribe to services by using the Cisco Unified
•
Communications Manager User Options application. This web-based
application provides a graphical user interface (GUI) for limited, end-user
configuration of IP Phone applications.
Before you set up services, gather the URLs for the sites that you want to set up
and verify that users can access those sites from your corporate IP telephony
network.
To set up these services, choose Device > Device Settings > Phone Services from
Cisco Unified Communications Manager Administration. Refer to Cisco
Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide for more information.
After you configure these services, verify that your users have access to the
Cisco Unified Communications Manager User Options web-based application,
from which they can select and subscribe to configured services. See the
Users Subscribe to Services and Configure Phone Features" section on page A-4
for a summary of the information that you must provide to end users.
To configure extension mobility services for users, refer to the Cisco
Unified Communications Manager Features and Services Guide.
Setting Up Services
"How
5-29