Attaching The Cisco Unified Ip Phone Expansion Module 7914 - Cisco 7940 - IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Attaching the Cisco Unified IP Phone Expansion Module 7914

The Cisco Unified IP Phone Expansion Module 7914 attaches to a Cisco Unified IP Phone 7960G to
extend the number or line appearances or programmable buttons on your phone. You can customize the
button templates for the Cisco Unified IP Phone Expansion Module 7914 to determine the number of
line appearances and speed dial buttons. See the
page 5-10
You can attach a Cisco Unified IP Phone Expansion Module 7914 to the Cisco Unified IP Phone 7960G:
•
•
To configure the Cisco Unified IP Phone Expansion Module 7914 on the Cisco Unified IP Phone, follow
these steps:
Procedure
Log in to the Cisco Unified Communications Manager Administration application.
Step 1
From the menu, choose Device > Phone.
Step 2
The Find and List Phone window displays. You can search for one or more phones that you want to
configure for the Cisco Unified IP Phone Expansion Module 7914.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone window reopens showing a list of the phones matching your search criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
Step 4
The Phone Configuration window displays.
Scroll to the Expansion Module Information section of the window.
Step 5
To add support for one expansion module, in the Module 1 field, select 7914 14-Button Line Expansion
Step 6
Module.
To add support for a second expansion module, in the Module 2 field, select 7914 14-Button Line
Expansion Module.
In the Firmware Load Information section of the window, there are two fields for specifying the firmware
load for Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Scroll to the top of the window and click Update.
Step 7
A message displays asking you to reset the phone for the changes to take effect. Click OK.
Click Reset Phone for the changes to take effect.
Step 8
Note Refer users to their Cisco Unified CM User Options web pages so that they can configure speed dial
buttons and program buttons to access phone services on the Cisco Unified IP Phone 7914 Expansion
Module. See the
for more details.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
for details.
When you initially add the phone to Cisco Unified Communications Manager by selecting
7914 14-Button Line Expansion Module in the Module 1 or Module 2 fields and selecting the
appropriate expansion module firmware. See
After the phone is configured in Cisco Unified Communications Manager.
"How Users Subscribe to Services and Configure Phone Features" section on page A-2
Attaching the Cisco Unified IP Phone Expansion Module 7914
"Modifying Phone Button Templates" section on
Step 6 in the following procedure.
3-7