Cisco 7941G - Unified IP Phone VoIP Administration Manual page 110

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Speed and duplex of the access port (labeled
Configuration 10/100 PC on the 7961G and 7941G; labeled
10/100/100 PC on the 7961G-GE and
7941G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure
the port on the switch to the same speed/duplex
as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you
must change the SW Port Configuration option
to the same setting.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
4-14
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
1.
2.
3.
4.
Unlock network
configuration options.
Scroll to the PC Port
Configuration option and
then press the Edit softkey.
Scroll to the setting that you
want and then press the
Select softkey.
Press the Save softkey.
OL-14620-01