Cisco 7941G - Unified IP Phone VoIP Administration Manual page 88

Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)
The Find and List Phone window displays. You can search for one or more phones
that you want to configure for the Cisco Unified IP Phone Expansion Module
7914.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone window shows a list of the phones that match your search
criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone
Step 4
Expansion Module 7914.
The Phone Configuration window displays.
Scroll to the Expansion Module Information section.
Step 5
To add support for one expansion module, in the Module 1 field, select
Step 6
7914 14-Button Line Expansion Module.
To add support for a second expansion module, in the Module 2 field, choose
7914 14-Button Line Expansion Module.
In the Firmware Load Information section, there are two fields for specifying the
firmware load for Modules 1 and 2. You can leave these fields blank to use the
default firmware load.
Click Save.
Step 7
A message displays asking you to reset the phone for the changes to take effect.
Click OK.
Step 8 Click Reset Phone for the changes to take effect.
Refer users to their Cisco Unified Communications Manager User Options web
Note
windows, so they can configure speed-dial buttons and program buttons to access
phone services on the Cisco Unified IP Phone Expansion Module 7914. See the
"How Users Subscribe to Services and Configure Phone Features" section on
page A-4
Related Topic
•
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
3-12
for more details.
Configuring Softkey Templates, page 5-28
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-14620-01