Cisco 7941G - Unified IP Phone VoIP Administration Manual page 137

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-14 Network Configuration Menu Options
Option Description
Load Server Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the phone
firmware can be retrieved for phone upgrades.
When the Load Server option is set, the phone
contacts the designated server for the firmware
upgrade.
Note
RTP Control Indicates whether the phone supports the Real
Protocol Time Control Protocol. Settings include:
Enabled
Disabled—default
If this feature is disabled, several call statistic
values display as 0. For additional information,
see the following sections:
•
•
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
The Load Server option allows you to
specify an alternate TFTP server for phone
upgrades only. The phone continues to use
TFTP Server 1 or TFTP Server 2 to obtain
configuration files. The Load Server
option does not provide management of
the process and of the files, such as file
transfer, compression, deletion, and so on.
Call Statistics Screen, page 7-16
Streaming Statistics, page 8-14
Device Configuration Menu
To Change
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone >
Phone Configuration.
4-41