Configuring Corporate Directories; Configuring Personal Directory - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Configuring Corporate and Personal Directories

Configuring Corporate Directories

Configuring Personal Directory

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
5-26
Corporate Directory—Allows a user to look up phone numbers for
•
co-workers.
To support this feature, you must configure corporate directories. See the
"Configuring Corporate Directories" section on page 5-26
information.
Personal Directory—Allows a user to store a set of personal numbers.
•
To support this feature, you must provide the user with software to configure
the personal directory. See the
page 5-26 for more information.
Cisco Unified Communications Manager uses a Lightweight Directory Access
Protocol (LDAP) directory to store authentication and authorization information
about users of Cisco Unified Communications Manager applications that
interface with Cisco Unified Communications Manager. Authentication
establishes the users' rights to access the system. Authorization identifies the
telephony resources that a user is permitted to use, such as a specific telephone
extension.
For more information, refer to the "LDAP System," "LDAP Directory," and
"LDAP Authentication" chapters in the Cisco Unified Communications
Administration Guide.
After the LDAP directory configuration completes, users can use the Corporate
Directory service on their Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE to look up users in the corporate directory.
Personal Directory consists of the following features:
Personal Address Book (PAB)
•
Personal Fast Dials (Fast Dials)
•
Address Book Synchronization Tool (TABSynch)
•
Users can access Personal Directory features by these methods:
Chapter 5 Configuring Features, Templates, Services, and Users
"Configuring Personal Directory" section on
for more
OL-14620-01