Cisco 7941G - Unified IP Phone VoIP Administration Manual page 109

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network port (labeled
Configuration 10/100 SW on the 7961G and 7941G; labeled
10/100/100 SW on the 7961G-GE and
7941G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure
the port on the switch to the same speed/duplex
as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you
must change the PC Port Configuration option
to the same setting.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Network Configuration Menu
To Change
Unlock network
1.
configuration options.
Scroll to the SW Port
2.
Configuration option and
then press the Edit softkey.
Scroll to the setting that you
3.
want and then press the
Select softkey.
Press the Save softkey.
4.
4-13