Security Configuration Menu - Cisco 7941G - Unified IP Phone VoIP Administration Manual

For cisco unified communications manager 6.1
Hide thumbs Also See for 7941G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-11
Ethernet Configuration Menu Option
Option
Description
Forwarding
Indicates whether the internal switch
Delay
begins forwarding packets between the
PC port and switched port on the phone
when the phone becomes active.
Default is disabled.
Span to PC Port
Indicates whether the phone will
forward packets transmitted and
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone's
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.

Security Configuration Menu

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
When forwarding delay is set to
disabled, the internal switch begins
forwarding packets immediately.
When forwarding delay is set to
enabled, the internal switch waits 8
seconds before forwarding packets
between the PC port and the switch
port.
The Security Configuration menu that you display from the Device Configuration
menu displays settings that relate to security for the phone.
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
4-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

7961g7961g-ge7941g-ge

Table of Contents