Cisco 7941G - Unified IP Phone VoIP Administration Manual page 84

Installing the Cisco Unified IP Phone
Table 3-1 Installing the Cisco Unified IP Phone
Procedure
Step 1 Connect the handset to the
Handset port.
Step 2 Connect a headset to the
Headset port.
Step 3
Connect the power supply to the
Cisco DC Adapter port.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
3-8
Before You Begin
Remove the hookswitch clip (see
area.
To install a Cisco Unified IP Phone, perform these steps:
Notes
—
Optional. You can add a
headset later if you do not
connect one now.
Optional.
Chapter 3 Setting Up the Cisco Unified IP Phone
"Handset" section on page
Reference
—
See the
page 3-5
headsets.
See the
the Cisco Unified
Communications Manager
Database" section on
page 2-14
3-4) from the cradle
"Headset" section on
for supported
"Adding Phones to
for guidelines.
OL-14620-01