Manager; Checklist For Configuring The Cisco Unified Ip Phone 7961G/7961G-Ge And 7941G/7941G-Ge In Cisco Unified Communications Manager - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Configuring Cisco Unified IP Phones in Cisco Unified
Communications Manager
Checklist for Configuring the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE in Cisco Unified Communications Manager
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Configuring Cisco Unified IP Phones in Cisco Unified Communications
•
Manager, page 1-27
Installing Cisco Unified IP Phones, page 1-32
•
To add phones to the Cisco Unified Communications Manager database, you can
use:
Auto-registration
•
• Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
•
For more information about these choices, see the
Unified Communications Manager Database" section on page
For general information about configuring phones in Cisco Unified
Communications Manager, refer to the "Cisco Unified IP Phone" chapter in Cisco
Unified Communications Manager System Guide.
Table 1-6 provides an overview and checklist of configuration tasks for the
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE in
Cisco Unified Communications Manager Administration. The list presents a
suggested order to guide you through the phone configuration process. Some tasks
are optional, depending on your system and user needs. For detailed procedures
and information, refer to the sources in the list.
Overview of Configuring and Installing Cisco Unified IP Phones
"Adding Phones to the Cisco
2-14.
1-27