Cisco 7941G - Unified IP Phone VoIP Administration Manual page 129

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-10 Media Configuration Menu Options (continued)
Option Description
Recording Tone Indicates the loudness setting for the beep tone
Local Volume that is received by the party whose phone has the
Recording Tone option enabled.
This setting applies for each listening device
(handset, speakerphone, headset).
Range: 0 percent (no tone) to 100 percent (same
level as current volume setting on the phone).
Default: 100
See also: Recording Tone
Recording Tone Indicates the loudness setting for the beep tone
Remote Volume that the remote party receives. The remote party is
the party who is on a call with the party whose phone
has the Recording Tone option enabled.
Range: 0 percent to 100 percent. (0 percent is -66
dBM and 100 percent is -3 dBM.)
Default: 84 percent (-10dBM)
See also: Recording Tone
Recording Tone Indicates the length of time in milliseconds for
Duration which the beep tone plays.
If the value you configure here is less than one
third the interval, then this value overrides the
default provided by the Network Locale.
Range: 0 to 3000
Note
See also: Recording Tone
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
For some Network Locales that use a
complex cadence, this setting applies only
to the first beep tone.
Device Configuration Menu
To Change
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
4-33