Cisco 7941G - Unified IP Phone VoIP Administration Manual page 128

Device Configuration Menu
Table 4-10 Media Configuration Menu Options (continued)
Option Description
Recording Tone Indicates whether a recording tone (often referred
to as a beep tone) is enabled or disabled for the
phone. If the recording tone option is enabled, the
phone plays the beep tone in both directions of
every call, regardless of whether the call actually
gets recorded. The beep tone first sounds when a
call is answered.
You may want to notify your users if you enable
this option.
Default: Disabled
Related Parameters:
•
•
•
Note
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
4-32
Recording Tone Local Volume
Recording Tone Remote Volume
Recording Tone Duration
Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often the
beep tone plays (called interval)—are
defined on a per-Network Locale basis in
the xml file that defines tones. This xml
file is usually named tones.xml or
g3-tones.xml.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
OL-14620-01