Device Configuration Menu; Callmanager Configuration Menu - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Device Configuration Menu

Device Configuration Menu

CallManager Configuration Menu

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
4-16
The Device Configuration menu provides access to eight sub-menus from which
you can view a variety of settings that are specified in the configuration file for a
phone. (The phone downloads the configuration file from the TFTP server.) These
sub-menus are:
CallManager Configuration Menu, page 4-16
•
• SIP Configuration Menu (SIP Phones Only), page 4-17
Call Preferences Menu, page 4-21
•
HTTP Configuration Menu, page 4-23
•
Locale Configuration Menu, page 4-25
•
UI Configuration Menu, page 4-27
•
Media Configuration Menu, page 4-30
•
Ethernet Configuration Menu, page 4-36
•
Security Configuration Menu, page 4-37
•
QoS Configuration Menu, page 4-39
•
Network Configuration Menu, page 4-40
•
For instructions about how to access the Device Configuration menu and its
sub-menus, see the "Displaying a Configuration Menu" section on page
The CallManager Configuration menu contains the options CallManager 1,
CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These
options show Cisco Unified Communications Manager servers that are available
for processing calls from the phone, in prioritized order.
To change these options, use Cisco Unified Communications Manager Group
Configuration.
For an available Cisco Unified Communications Manager server, an option on the
CallManager Configuration menu will show the Cisco Unified Communications
Manager server IP address or name and one of the following states:
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
4-2.
OL-14620-01