Cisco 7941G - Unified IP Phone VoIP Administration Manual page 159

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Directed Call Park
Direct transfer
Do Not Disturb
(DND)
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Description
Allows a user to transfer an active call to an
available directed call park number that the
user dials or speed dials.
Allows users to connect two calls to each
other (without remaining on the line).
When DND is turned on, no audible rings
occur during the ringing-in state of a call.
You can configure the phone to have a
softkey template with a DND softkey or a
phone-button template with DND as one of
the selected features.
The following DND-related parameters are
configurable in Cisco Unified
Communications Manager Administration:
Do Not Disturb—This checkbox allows
•
you to enable DND on a per-phone
basis. Choose Device > Phone > Phone
Configuration.
• DND Incoming Call Alert—Choose the
type of alert to play on a phone for
incoming calls when DND is active.
This parameter is located on both the
Common Phone Profile window and the
Phone Configuration window
(Configuration window value takes
precedence).
Include DND In BLF Status—Enables
•
DND status to override busy/idle state.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information refer to:
Cisco Unified
•
Communications Manager
Features and Services Guide,
"Call Park and Directed Call
Park" chapter.
For more information, refer to
Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
Manager Features and Services
Guide, "Do Not Disturb" chapter.
5-11