Attaching The Cisco Unified Ip Phone Expansion Module 7914 (Sccp Phones Only) - Cisco 7962G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Attaching the Cisco Unified IP Phone Expansion Module 7914
(SCCP Phones Only)
The Cisco Unified IP Phone Expansion Module 7914 attaches to a Cisco Unified IP Phone 7962G to
extend the number or line appearances or programmable buttons on your phone. You can customize the
button templates for the Cisco Unified IP Phone Expansion Module 7914 to determine the number of
line appearances and speed dial buttons. See the
page 5-17
The Cisco Unified IP Phone Expansion Module 7914 is not compatible with the following:
•
•
You can attach one or more Cisco Unified IP Phone Expansion Module 7914s to the
Cisco Unified IP Phone 7962G:
•
•
To configure the Cisco Unified IP Phone Expansion Module 7914 on the Cisco Unified IP Phone, follow
these steps:
Procedure
Log in to the Cisco Unified Communications Manager Administration application.
Step 1
The Cisco Unified Communications Manager Administration page appears.
From the menu, choose Device > Phone.
Step 2
The Find and List Phone page appears. You can search for one or more phones that you want to configure
for the Cisco Unified IP Phone Expansion Module 7914.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone page reappears showing a list of the phones matching your search criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module 7914.
Step 4
The Phone Configuration page appears.
Scroll to the Expansion Module Information section of the page.
Step 5
To add support for one expansion module, in the Module 1 field, select 7914 14-Button Line Expansion
Step 6
Module.
To add support for a second expansion module, in the Module 2 field, select 7914 14-Button Line
Expansion Module.
In the Firmware Load Information section of the page, there are two fields for specifying the firmware
load for Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Click the Save icon near the top of the page.
Step 7
A message appears asking you to reset the phone for the changes to take effect. Click OK.
OL-12641-01
for details.
The Cisco Unified IP Phone Expansion Module 7914 is not compatible with SIP phones.
The Cisco Unified IP Phone Expansion Module 7914 is not supported on the
Cisco Unified IP Phone 7942G.
When you initially add the phone to Cisco Unified Communications Manager by selecting
7914 14-Button Line Expansion Module in the Module 1 or Module 2 fields and selecting the
appropriate expansion module firmware. See
After the phone is configured in Cisco Unified Communications Manager.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0

Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)

"Modifying Phone Button Templates" section on
Step 6 in the following procedure.
3-9