Overview Of Supported Security Features - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Understanding Security Features for Cisco Unified IP Phones
Table 1-2 Cisco Unified IP Phone Security Topics (continued)
Topic
Resetting or restoring the phone
802.1X Authentication for Cisco Unified IP
Phones

Overview of Supported Security Features

Note
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
1-16
Table 1-3 provides an overview of the security features that the Cisco Unified
IP Phone 7961G/7961G-GE and 7941G/7941G-GE support. For more
information about these features and about Cisco Unified Communications
Manager and Cisco Unified IP Phone security, refer to Cisco
Unified Communications Manager Security Guide.
For information about current security settings on a phone, choose Settings >
Security Configuration and choose Settings > Device Configuration >
Security Configuration. For more information, see the
Menu" section on page
Most security features are available only if a certificate trust list (CTL) is installed
on the phone. For more information about the CTL, refer to "Configuring the
Cisco CTL Client" chapter in Cisco Unified Communications Manager Security
Guide.
Chapter 1
Reference
See the "Resetting or Restoring the Cisco
Unified IP Phone" section on page 9-18
See these sections:
"Supporting 802.1X Authentication on Cisco
•
Unified IP Phones" section on page 1-23
"Security Configuration Menu" section on
•
page 4-37
"Status Menu" section on page 7-3
•
"Troubleshooting Cisco Unified IP Phone
•
Security" section on page 9-12
4-37.
An Overview of the Cisco Unified IP Phone
"Security Configuration
OL-14620-01