Firmware Versions Screen - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Status Menu

Firmware Versions Screen

Step 1
Step 2
Step 3
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
7-14
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3 Network Statistics Message Information (continued)
Item
Elapsed Time
Port 1
Port 2
DHCP BOUND
The Firmware Versions screen displays information about the firmware version
that is running on the phone.
on this screen.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Select Status.
Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
Description
Amount of time that has elapsed since the phone last
rebooted
Link state and connection of the PC port (for
example,
Auto 100 Mb Full-Duplex
PC port is in a link-up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
Link state and connection of the Network port
Phone is bound to the DHCP server, DHCP
parameters are acceptable, and the phone has
received a DHCPACK message.
Table 7-4 describes the information that is displayed
means that the
OL-14620-01