Adding Phones With Bat - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with BAT

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
2-18
Chapter 2
For information about determining a MAC address, see the
MAC Address for a Cisco Unified IP Phone" section on page
After you have collected MAC addresses, in Cisco Unified Communications
Manager Administration, choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified
Communications Manager, refer to Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager System Guide.
Related Topics
• Adding Phones with Auto-Registration, page 2-15
Adding Phones with Auto-Registration and TAPS, page 2-16
•
Adding Phones with BAT, page 2-18
•
Cisco Unified Communications Manager Bulk Administration Tool (BAT), a
standard Cisco Unified Communications Manager application, enables you to
perform batch operations, which includes registration, on multiple phones.
To add phones by using BAT only (not in conjunction with TAPS), you first need
to obtain the appropriate MAC address for each phone.
For information about determining a MAC address, see the
MAC Address for a Cisco Unified IP Phone" section on page
For detailed instructions about using BAT, refer to Cisco Unified Communications
Manager Bulk Administration Guide.
Related Topics
Adding Phones with Auto-Registration, page 2-15
•
Adding Phones with Auto-Registration and TAPS, page 2-16
•
Adding Phones with Cisco Unified Communications Manager
•
Administration, page 2-17
Preparing to Install the Cisco Unified IP Phone on Your Network
"Determining the
2-21.
"Determining the
2-21.
OL-14620-01