Cisco 7941G - Unified IP Phone VoIP Administration Manual page 220

Network Configuration
Table 8-2 Network Configuration Area Items (continued)
Item
Auto Line Select
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
Web Access Enabled
Span to PC Port
PC VLAN
CDP: PC Port
CDP: SW Port
LLDP-MED: SW Port
LLDP: PC Port
LLDP Power Priority
LLDP Asset ID
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
8-10
Chapter 8
Description
Indicates whether the phone shifts the call focus to incoming calls on
all lines.
DSCP IP classification for call control signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or disabled (No) for the
phone.
Indicates whether the phone will forward packets transmitted and
received on the network port to the access port.
VLAN used to identify and remove 802.1P/Q tags from packets sent
to the PC.
Indicates whether CDP is supported on the PC port.
Indicates whether CDP is supported on the switch port.
Indicates whether Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) is enabled on the switch port.
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled
on the PC port.
Advertises the phone's power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
Unknown—default
•
Low
•
High
•
Critical
•
Identifies the asset ID assigned to the phone for inventory
management.
Monitoring the Cisco Unified IP Phone Remotely
OL-14620-01