Network Configuration Menu - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

Note
Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone
obtains its IP address.
BOOTP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP server.
MAC Address Unique Media Access Control (MAC) address
of the phone.
Host Name Unique host name that the DHCP server
assigned to the phone.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
The Network Configuration menu provides options for viewing and making a
variety of network settings.
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
"Displaying a Configuration Menu" section on page
The phone also has a Network Configuration menu that you access directly from
the Settings menu. For information about the options on that menu, see the
"Network Configuration Menu" section on page
Before you can change an option on this menu, you must unlock options as
described in the "Unlocking and Locking Options" section on page
Yes, or No softkeys for changing network configuration options display only if
options are unlocked.
For information about the keys you can use to edit options, see the
Values" section on page
Table 4-2 describes these options and, where
4-4.
Network Configuration Menu
4-2.
4-40.
4-3. The Edit,
"Editing
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
4-7