Ui Configuration Menu - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-8 NTP Configuration Menu Options (continued)
Option Description
NTP Mode 1 Primary server mode. Supported modes
are Directed Broadcast, Unicast,
Multicast, and Any cast.
NTP Mode 2 Secondary server mode. Supported
modes are Directed Broadcast, Unicast,
Multicast, and Any cast.

UI Configuration Menu

Table 4-9 UI Configuration Menu Options
Option Description
Auto Line Select Indicates whether the phone shifts the
call focus to incoming calls on all lines.
When this option is disabled, the phone
only shifts the call focus to incoming
calls on the line that is in use. When
this option is enabled, the phone shifts
the call focus to the line with the most
recent incoming call.
Default: Disabled
BLF for Call Indicates whether the Busy Lamp Field
Lists (BLF) is enabled for call lists.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
The UI Configuration menu displays the status of various user interface features
on the phone.
Device Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
From Cisco Unified Communications
Manager Administration,
System > Phone NTP Reference.
To Change
Use Cisco Unified Communications
Manager Administration,
Device > Phone >
Phone Configuration.
From Cisco Unified Communications
Manager Administration,
System > Enterprise Parameters.
4-27