Firmware Versions Screen - Cisco 7942G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3
Item
One of the following values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
Port 2
DHCP BOUND

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Step 1
Select Status.
Step 2
Select Firmware Versions.
Step 3
To exit the Firmware Version screen, press the Exit softkey.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Network Statistics Message Information (continued)
Table 7-4 describes the information that is displayed on this screen.
Description
Cause of the last reset of the phone
Amount of time that has elapsed since the phone last rebooted
Link state and connection of the PC port (for example,
means that the PC port is in a link-up
100 Mb Full-Duplex
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
Link state and connection of the Network port
Phone is bound to the DHCP server, DHCP parameters are
acceptable, and the phone has received a DHCPACK message.
Status Menu
Auto
7-9