Firmware Versions Screen - Cisco 7931G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3
Item
Port 2
IPv4

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, take either of these actions:
•
•
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Network Statistics Message Components (continued)
Description
Link state and connection of the Network port
Information on the DHCP status. This includes the following states:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Table 7-4 explains the information that is displayed on this screen.
If the phone is registered with Cisco Unified Communications Manager, press the Application Menu
button, then choose Settings > Status > Firmware Versions.
By default, the Application Menu button is line button 24 (the top left line button).
If the phone is not registered with Cisco Unified Communications Manager, press the Settings
softkey and then choose Status > Firmware Versions.
This softkey appears only when the phone is not registered.
CDP BOUND
CDP INIT
DHCP BOUND
DHCP DISABLED
DHCP INIT
DHCP INVALID
DHCP REBINDING
DHCP REBOOT
DHCP RENEWING
DHCP REQUESTING
DHCP RESYNC
DHCP UNRECOGNIZED
DHCP WAITING COLDBOOT TIMEOUT
SET DHCP COLDBOOT
SET DHCP DISABLED
DISABLED DUPLICATE IP
SET DHCP FAST
Status Menu
7-11