Network Configuration Menu - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Network Configuration Menu

Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the
phone obtains its IP address.
BOOTP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP
server.
MAC Address Unique Media Access Control (MAC) address
of the phone.
Host Name Unique host name that the DHCP server
assigned to the phone.
Domain Name Name of the Domain Name System (DNS)
domain in which the phone resides.
IP Address Internet Protocol (IP) address of the phone.
If you assign an IP address with this option,
you must also assign a subnet mask and
default router. See the Subnet Mask and
Default Router options in this table.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
4-8
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Unlock network configuration
1.
options.
Set the DHCP Enabled option
2.
to No.
Scroll to the Domain Name
3.
option, press the Edit softkey,
and then enter a new domain
name.
Press the Validate softkey and
4.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP Enabled option
2.
to No.
Scroll to the IP Address
3.
option, press the Edit softkey,
and then enter a new IP
Address.
Press the Validate softkey and
4.
then press the Save softkey.
OL-14585-01