Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-1
Telephony Features for the Cisco Unified IP Phone
Feature
Abbreviated dialing A user can configure up to 99 speed-dial
Audible Message
Waiting Indicator
Auto answer
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
Description
entries. Speed-dial entries that are not
assigned to the speed-dial buttons on the
phone are used for abbreviated dialing.
When a user starts dialing digits, the
AbbrDial softkey appears, and the user can
access any speed-dial entry by entering the
appropriate index.
A stutter tone from the handset, headset, or
speakerphone indicates that a user has one
or more new voice messages on a line.
The stutter tone is line-specific. You
Note
hear it only when using the line with
the waiting messages.
Causes the speakerphone to go off hook
automatically when an incoming call is
received. The user can monitor the call
using the speaker but must pick up the
handset to speak to the caller.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the:
Cisco Unified Communications
•
Manager Administration
Guide, "Cisco Unified IP
Phone Configuration" chapter
Cisco Unified Communications
•
Manager System Guide,
"Cisco Unified IP Phones"
chapter
For more information, refer to:
Cisco Unified
•
Communications Manager
Administration Guide,
"Message Waiting
Configuration" chapter.
Cisco Unified
•
Communications Manager
System Guide, "Voice Mail
Connectivity to Cisco Unified
Communications Manager"
chapter.
For more information, refer to the
Cisco Unified Communications
Manager Administration Guide,
"Configuring Directory Numbers"
chapter.
5-3