Cisco 7906G - Unified IP Phone VoIP Administration Manual page 102

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
TFTP Server 2 Optional backup TFTP server that the phone
uses if the primary TFTP server is
unavailable.
If neither the primary TFTP server nor the
backup TFTP server is listed in the CTL file
on the phone, you must unlock the CTL file
before you can save changes to the TFTP
Server 2 option. In this case, the phone will
delete the CTL file when you save changes to
the TFTP Server 2 option.
For information about the CTL file, refer to
Cisco Unified Communications Manager
Security Guide. For information about
unlocking the CTL file, see to the
Screen" section on page
Default Router 1 Default router used by the phone (Default
Router 1) and optional backup routers
Default Router 2
(Default Router 2–5).
Default Router 3
Default Router 4
Default Router 5
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
4-10
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"CTL File
4-40.
To Change
Unlock the CTL file, if
1.
necessary.
Unlock network configuration
2.
options.
Enter an IP address for the
3.
TFTP Server 1 option.
Scroll to the TFTP Server 2
4.
option, press the Edit softkey,
and then enter a new backup
TFTP server IP address.
Press the Validate softkey, and
5.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP Enabled option
2.
to No.
Scroll to the appropriate
3.
Default Router option, press
the Edit softkey, and then
enter a new router IP address.
Press the Validate softkey.
4.
Repeat Steps 3 and 4 as needed
5.
to assign backup routers.
Press the Save softkey.
6.
OL-14585-01