Overview Of Supported Security Features - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-2 Cisco Unified IP Phone Security Topics (continued)
Topic
Deleting the CTL file from the phone
Resetting or restoring the phone
802.1X Authentication for Cisco Unified IP
Phones

Overview of Supported Security Features

Note
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
This section provides an overview of the security features that the phone supports.
For more information about these features and about
Cisco Unified Communications Manager and Cisco Unified IP Phone security,
refer to Cisco Unified Communications Manager Security Guide.
For information about current security settings on a phone, look at the Security
Configuration menus (press the Applications Menu button and choose Settings
> Security Configuration or Settings > Device Configuration > Security
Configuration). For more information, see
the Cisco Unified IP Phone."
Most security features are available only if a certificate trust list (CTL) is installed
on the phone. For more information about the CTL, refer to Cisco Unified
Communications Manager Security Guide.
Understanding Security Features for Cisco Unified IP Phones
Reference
See the "Resetting or Restoring the
Cisco Unified IP Phone" section on page
See the "Resetting or Restoring the
Cisco Unified IP Phone" section on page
See these sections:
"Supporting 802.1X Authentication on Cisco
•
Unified IP Phones" section on page 1-23
"802.1X Authentication and Status" section
•
on page 4-43
"Troubleshooting Cisco Unified IP Phone
•
Security" section on page 9-12
Chapter 4, "Configuring Settings on
9-21.
9-21.
1-15