Cisco 7906G - Unified IP Phone VoIP Administration Manual page 51

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-7 Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G
Installation Step and Purpose
Step 1 Choose the power source for the phone:
Power over Ethernet (PoE)
–
External power supply
–
Determines how the phone receives power.
Step 2 Assemble the phone, adjust phone placement, and
connect the network cable.
Locates and installs the phone in the network.
Step 3
Monitor the phone startup process.
Verifies that phone is configured properly.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
See the "Providing Power to the
Cisco Unified IP Phones 7906G and
7911G" section on page
See the "Installing the Cisco Unified IP
Phone" section on page
See the "Installing the Cisco Unified IP
Phone" section on page
See the "Verifying the Phone Startup
Process" section on page
2-4.
3-8.
3-8.
3-16.
1-33