Cisco 7906G - Unified IP Phone VoIP Administration Manual page 149

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Group call pickup
Hold
Hold Reversion
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
Description
Allows users to pick up incoming calls
within their own group or in other groups.
Allows the user to move a connected call
from an active state to a held state.
Limits the amount of time that a call can be
on hold before reverting back to the phone
that put the call on hold and alerting the
user.
Reverting calls are distinguished from
incoming calls by a single ring (or beep,
depending on the new call indicator setting
for the line). This notification repeats at
intervals if not resumed.
A call that triggers Hold Reversion also
displays an animated icon in the call bubble
and a brief message on the status line.
You can configure call focus priority to
favor incoming or reverting calls.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the:
Cisco Unified Communications
•
Manager Administration
Guide, "Pickup Group
Configuration" chapter
Cisco Unified Communications
•
Manager System Guide, "Call
Pickup" chapter
Requires no configuration,
•
unless you want to use music
on hold. See "Music-on-Hold"
in this table for information.
See also: "Hold Reversion" in
•
this table.
For more information about
configuring this feature, refer to
Cisco Unified Communications
Manager Features and Services
Guide, "Hold Reversion" chapter.
5-11