Cisco 7906G - Unified IP Phone VoIP Administration Manual page 249

Appendix A Providing Information to Users
Refer to the installation and configuration instructions that follow.
Installing the Synchronizer
Get the Cisco Unified IP Phone Address Book Synchronizer installer file from
Step 1
your system administrator.
Double-click the TabSyncInstall.exe file provided by your system administrator.
Step 2
The Welcome to Cisco Unified IP Phone Address Book Synchronizer window
displays.
Step 3 Click Next.
The License Agreement window displays.
Read the license agreement information, and click Yes to accept.
Step 4
The Choose Destination Location window displays.
Choose the directory in which you want to install the application and click Next.
Step 5
The Start Copying Files window displays.
Verify that you have chosen the correct directory, and click Next.
Step 6
The installation wizard installs the application to your computer. When the
installation is complete, the InstallShield Wizard Complete window displays.
Click Finish.
Step 7
To complete the process, perform the steps in
Step 8
Configuring the Synchronizer
Open the Cisco Unified IP Phone Address Book Synchronizer.
Step 1
If you accepted the default installation directory, you can open the application by
choosing Start > Programs > Cisco > IP Phone Address Synchronizer.
To configure user information, click the Password button.
Step 2
The Cisco Unified IP Phone User window displays.
Enter the Cisco Unified IP Phone user name and password and click OK.
Step 3
To configure synchronization rules, click the Rules Options button.
Step 4
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
How Users Configure Personal Directory Entries
Configuring the Synchronizer.
A-5