Security Configuration Menu; Network Configuration - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Unified ip phone cisco unified communications manager 6.1
Hide thumbs Also See for 7906G - Unified IP Phone VoIP:
Table of Contents

Advertisement

Security Configuration Menu

Table 4-16
Network Configuration Menu Options (continued)
Option
Description
LLDP-MED:
Enables and disables Link Layer Discovery
SW Port
Protocol Media Endpoint Discovery
(LLDP-MED) on the switch port. Use this
setting to force the phone to use a specific
discovery protocol, which should match the
protocol supported by the switch. Settings
include:
LLDP Power
Advertises the phone's power priority to the
Priority
switch, enabling the switch to appropriately
provide power to the phones. Settings include:
LLDP Asset ID
Identifies the asset ID assigned to the phone for
inventory management.
Security Configuration Menu
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
4-38
Enabled—default
Disabled
Unknown—default
Low
High
Critical
The Security Configuration menu that you access directly from the Settings menu
provides information about various security setting. It also provides access to the
CTL File screen and the Trust List menu, if a CTL file is installed on the phone.
For instructions about how to access the Device Configuration menu and its
sub-menus, see the
"Displaying a Configuration Menu" section on page
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
4-3.
OL-14585-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7911g

Table of Contents