Cisco 7906G - Unified IP Phone VoIP Administration Manual page 142

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Barge
Block external to
external transfer
Call display
restrictions
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
5-4
Description
Allows a user to join an in-progress call on
a shared line. Phones support Barge in two
conference modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
Prevents users from transferring an external
call to another external number.
Determines the information that will
display for calling or connected lines,
depending on the parties who are involved
in the call.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to the:
•
•
•
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "External Call Transfer
Restrictions" chapter.
For more information, refer to the:
•
•
•
Cisco Unified Communications
Manager Administration
Guide, "Cisco Unified IP
Phone Configuration" chapter
Cisco Unified Communications
Manager System Guide,
"Cisco Unified IP Phones"
chapter
Cisco Unified Communications
Manager Features and
Services Guide, "Barge and
Privacy" chapter
Cisco Unified Communications
Manager Administration
Guide, "Cisco Unified IP
Phone Configuration" chapter
Cisco Unified Communications
Manager System Guide,
"Understanding Route Plans"
chapter
Cisco Unified Communications
Manager Features and
Services Guide, "Call Display
Restrictions" chapter
OL-14585-01