Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Managing the User Options Web Pages

Giving Users Access to the User Options Web Pages

Specifying Options that Appear on the User Options Web Pages

Note
Step 1
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
5-26
Before a user can access the User Options web pages, you must use Cisco Unified
Communications Manager Administration to add the user to a standard Cisco
Unified Communications Manager end user group. To do so, choose User
Management > User Groups.
For additional information, refer to:
Cisco Unified Communications Manager Administration Guide, "User Group
•
Configuration" chapter
• Cisco Unified Communications Manager System Guide, "Roles and User
Groups" chapter
Most options that are on the User Options web pages appear by default. However,
the following options must be set by the system administrator by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager
Administration:
Show Ring Settings
•
Show Line Text Label Settings
•
Show Call Forwarding
•
The settings apply to all User Options web pages at your site.
To change the options that appear on the User Options web pages, follow these
steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System >
Enterprise Parameters.
The Enterprise Parameters Configuration window displays.
Chapter 5 Configuring Features, Templates, Services, and Users
OL-14585-01