Cisco 7906G - Unified IP Phone VoIP Administration Manual page 127

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-16 Network Configuration Menu Options (continued)
Option Description
CDP: SW Port Indicates whether CDP is enabled on the switch
port (default is enabled).
•
•
Note
The current PC and switch port CDP values are
shown on the Settings menu.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
Enable CDP on the switch port for VLAN
assignment for the phone, power
negotiation, QoS management, and 802.1x
security.
Enable CDP on the switch port when the
phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
presented, indicating that CDP should be
disabled on the switch port only if the
phone is connected to a non-Cisco
switch.
Device Configuration Menu
To Change
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration.
4-35