Cisco 7906G - Unified IP Phone VoIP Administration Manual page 48

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager (continued)
Configuration Step and Purpose
Step 5 Customize softkey templates (optional).
Adds, deletes, or changes order of softkey features that
display on the user's phone to meet feature usage needs.
Step 6 Configure speed-dial buttons and assign speed-dial
numbers (optional).
Adds speed-dial numbers.
Users can change speed-dial settings on their
Note
phones with Cisco Unified Communications
Manager User Options.
Step 7 Configure Cisco Unified IP Phone services and assign
services (optional).
Provides IP Phone services.
Note Users can add or change services on their
phones with Cisco Unified Communications
Manager User Options.
Step 8 Assign services to phone buttons (optional).
Provides single button access to an IP phone service or
URL.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
1-30
Chapter 1 An Overview of the Cisco Unified IP Phone
For More Information
Refer to the Cisco Communications
Manager Administration Guide,
"Softkey Template Configuration"
chapter.
See the "Configuring Softkey
Templates" section on page
Refer to the Cisco Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration chapter, "Configuring
Speed-Dial Buttons" section.
Refer to the Cisco Communications
Manager Administration Guide,
Cisco Unified IP Phone Services
Configuration chapter.
See the "Setting Up Services"
section on page
Refer to Cisco Unified
Communications Manager
Administration Guide, "Cisco
Unified IP Phone Configuration"
chapter, "Adding a Cisco Unified IP
Phone Service to a Phone Button"
section.
5-23.
5-23.
OL-14585-01