Installing the Cisco Unified IP Phone
Table 3-1
Installing a Cisco Unified IP Phone (continued)
Installation Step
Step 4
Connect a Category 3 or 5
straight-through Ethernet
cable from the switch to the
10/100 SW port.
Step 5
(Cisco Unified IP Phone
7911G only) Connect a
Category 3 or 5
straight-through Ethernet
cable from another network
device, such as a desktop
computer, to the 10/100 PC
port.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
3-10
Notes
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
Optional. You can connect
another network device later if
you do not connect one now.
Chapter 3
Setting Up the Cisco Unified IP Phone
References
See the
"Network and Access
Ports" section on page 3-4
guidelines.
See the
"Network and Access
Ports" section on page 3-4
guidelines.
for
for
OL-14585-01