Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-6
Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager
Configuration Step and Purpose
Step 1
Gather the following information about the phone:
Phone Model
•
MAC address
•
Physical location of the phone
•
•
Name or user ID of phone user
Device pool
•
Calling search space and location information (if
•
used)
Number of lines, associated directory numbers
•
(DNs), and partitions to assign to the phone
Cisco Unified Communications Manager user to
•
associate with the phone
Phone usage information that affects phone button
•
template, softkey template, phone features, IP
Phone services, or phone applications
Provides list of configuration requirements for setting
up phones.
Identifies preliminary configuration that you need to
perform before configuring individual phones, such as
phone button templates or softkey templates.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
1-28
Chapter 1
An Overview of the Cisco Unified IP Phone
For More Information
Refer to the Cisco Unified
Communications Manager System
Guide, Cisco Unified IP Phone
chapter.
See the
"Telephony Features
Available for the Cisco Unified IP
Phone" section on page
5-2.
OL-14585-01