Unlocking And Locking Options; Displaying A Configuration Menu - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Configuration Menus on the Cisco Unified IP Phones 7906G and 7911G

Unlocking and Locking Options

Note
Caution
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
4-4
Overview of Options Configurable from a Phone, page 4-6
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-15
•
Configuration options that can be changed from a phone are locked by default to
prevent users from making changes that could affect the operation of a phone. You
must unlock these options before you can change them.
When options are inaccessible for modification, a locked padlock icon appears on
the configuration menus. When options are unlocked and accessible for
modification, an unlocked padlock icon appears on these menus, as shown next.
To unlock or lock options, press **#. This action either locks or unlocks the
options, depending on the previous state.
If a Settings Menu password has been provisioned, SIP phones present an "Enter
password" prompt after you enter **#.
After you have made your changes, you must lock the options.
Do not press **# to unlock options and then immediately press **# again to lock
options. The phone will interpret this sequence as **#**, which will reset the
phone. To lock options after unlocking them, wait at least 10 seconds before you
press **# again.
Related Topics
Displaying a Configuration Menu, page 4-3
•
• Editing the Values of an Option Setting, page 4-5
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
OL-14585-01