Cisco 7906G - Unified IP Phone VoIP Administration Manual page 108

Device Configuration Menu
Table 4-3
State
Active
Standby
Blank
An option may also display one of more of the designations or icons shown in
Table
Table 4-4
Designation
SRST
TFTP
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
4-16
Cisco Unified Communications Manager Server States
Description
Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services
Cisco Unified Communications Manager server to which the
phone switches if the current server becomes unavailable
No current connection to this Cisco Unified Communications
Manager server
4-4.
Cisco Unified Communications Manager Server Designations
Description
Indicates a Survivable Remote Site Telephony router
capable of providing Cisco Unified Communications
Manager functionality with a limited feature set. This
router assumes control of call processing if all other
Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications
Manager always appears last in the list of servers, even if it
is active.
For more information, refer to Cisco Unified
Communications Manager Administration Guide.
Indicates that the phone was unable to register with a
Cisco Unified Communications Manager listed in its
configuration file, and that it registered with the TFTP
server instead.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
OL-14585-01