Device Configuration Menu; Callmanager Configuration Menu - Cisco 7906G - Unified IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Device Configuration Menu

CallManager Configuration Menu

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
The Device Configuration menu provides access to submenus from which you can
view a variety of settings that are specified in the configuration file for a phone.
(The phone downloads the configuration file from the TFTP server.) These
sub-menus are:
CallManager Configuration Menu, page 4-15
•
• SIP Configuration Menu (SIP Phones Only), page 4-17
Call Preferences Menu (SIP Phones Only), page 4-21
•
HTTP Configuration Menu, page 4-22
•
Locale Configuration Menu, page 4-23
•
UI Configuration Menu, page 4-24
•
Media Configuration Menu, page 4-26
•
NTP Configuration Menu (SIP Phones Only), page 4-28
•
Ethernet Configuration Menu, page 4-29
•
Security Configuration Menu, page 4-30
•
Security Configuration Menu, page 4-30
•
QoS Configuration Menu, page 4-32
•
Network Configuration, page 4-33
•
For instructions about how to access the Device Configuration menu and its
sub-menus, see the "Displaying a Configuration Menu" section on page
The CallManager Configuration menu contains the options CallManager 1,
CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These
options show Cisco Unified Communications Manager servers that are available
for processing calls from the phone, in prioritized order. To change these options,
use Cisco Unified Communications Manager Administration.
For an available Cisco Unified Communications Manager server, an option on the
CallManager Configuration menu will show the Cisco Unified Communications
Manager server IP address or name and one of the states shown in
Device Configuration Menu
4-3.
Table 4-3.
4-15