Using Dynamic Job Descriptor Entries (DJDEs)
STOCKS DJDE
Type
Syntax
Options
TMODE DJDE
Type
Syntax
5-70
Identifies the stock set and its associated stock(s) to be used in a
report. This stockset file (STOCKSETNAME.STK) must already
have been created by a compiled JSL and must currently reside
in the "lcds" resource folder on the system disk.
Page oriented
STOCKS = stocksetname
Table 5-59. STOCKS DJDE options and
Option
stocksetname
STOCKS DJDE: point to note
Whenever a new stockset is chosen, that is, at start of report or
through a JDE or JDL switch via DJDE, the system verifies each
stock to determine that the stock exists and can be made active.
This verification provides an automatic method of changing
stocks in the printer as required by the data stream.
Specifies a maximum paper width in order to improve throughput
efficiency when using mixed paper sizes. (Refer to the OUTPUT
TMODE parameter description in the "Specifying print format
parameters" chapter, for an explanation of pitch mode.)
Page oriented
TMODE = (width [, widthunit])
definitions
Definition
Name of the STOCKSET used in a report.
Using LCDS Print Description Language