Output Iresult - Xerox DocuPrint 100 Software Manual

Default
Syntax
Options
Table 4-61. OUTPUT IRESULT parameter options and definitions
Option
BLACK
COLOR
Default

OUTPUT IRESULT

parameter: points
to note
Using LCDS Print Description Language
Table 4-60. OUTPUT INVERT parameter options and
Option
BOTH
NONE
NONE
OUTPUT IRESULT
Specifies what the result will be when objects that are imaged
with different inks overlap.
OUTPUT IRESULT = {BLACK | COLOR}
Definition
Specifies that, when two objects that are imaged with different inks overlap, and
black and colored pixels coincide, the resulting pixel is black.
Specifies that, when two objects that are imaged with different inks overlap, and
black and colored pixels coincide, the resulting pixel is colored.
The ink priority that was chosen at installation.
• For monochrome printers such as the DP EPS, the COLOR
and BLACK parameters produce identical results (black).
• The color that results from overlapping objects may be only
black or a color for an entire page. For example, a page
cannot have red text printed over a black background and
also black text printed over a red background.
• The IRESULT can be specified on a page basis with the
IRESULT DJDE. If more than one IRESULT is specified on a
page, the last instance takes precedence.
Specifying print format parameters
definitions (Continued)
Definition
Specifies page inversion on front and back sides.
Turns page inversion off.
4-61