Input Processing Command Descriptions - Xerox DocuPrint 100 Software Manual

Input processing command descriptions

Table 2-3. Summary of PDL commands associated with input
Command
BLOCK command
CODE command
DBCODE command
IDEN command
KCODE command
PCC command
RECORD command
SEFFNT command
TCODE command
VOLUME command
Using LCDS Print Description Language
As before, volume 1 is the start-of-job, and the volume
specified by n is the volume that contains data for the last
page that was written to the print file before the system
rollover.
The basic PDL commands to control input processing are
CODE, PCC, RECORD, SEFFNT, TCODE, and VOLUME, which
are defined here. The "Using logical processing" section defines
commands that specify logical functions that may be performed
on either a record or page basis.
The input related PDL commands are summarized in the
following table.
Function
Describes input block characteristics
Defines the input character code translation table.
Defines an input double-byte character code translation table.
Indicates that the report contains DJDEs.
Defines an input double-byte character code translation table.
Defines printer carriage control table.
Specifies the input data record characteristics.
Defines font mapping for short edge feed jobs.
Defines masked comparison type assignments for translation.
Specifies input medium characteristics.
Specifying input parameters
processing
2-11