Output Modify - Xerox DocuPrint 100 Software Manual

OUTPUT LOGO
parameter: points
to note
Syntax
Options
Table 4-63. OUTPUT MODIFY parameter options and definitions
Option
cmeid
init
copies
NONE
Default
Using LCDS Print Description Language
• The number of logos that are allowed on a page varies
depending on the structure of the logo and the amount of
available dynamic memory space. If there is not enough
dynamic memory available for the number of logos specified
for a given page, an error message is generated.
• Existing .LGO (logo) files and restricted RES format .LGO
files are printed in black by highlight color printers unless
inkrefs are specified in the INKS parameter.
If an inkref in the list is omitted, you must use commas to
maintain the relative positioning of the remaining ink
references. If more than two inkrefs are specified, the
additional inkrefs are ignored.
• If any of the inks that will be substituted were specified in the
logo definition with a NOSUBSTITUTION parameter, the
system processes the ink requests according to what was
specified in the ABNORMAL ISUBSTITUTE parameter.

OUTPUT MODIFY

Specifies CMEs that will be associated with report copies.
OUTPUT MODIFY = {(cmeid [, init [, copies]]) | NONE}
Definition
copy modification entry identifier.
The identifier or file name of a CME.
initial copy
Specifies the initial copy to which the associated CME is to be applied. If no
initial copy is specified, the CME applies to all copies.
Specifies the number of plies (passes) on which apply the CME will be applied.
If copies is not specified, the CME applies to all copies beginning with the copy
number specified by init.
Specifies that data are processed without modification.
NONE
Specifying print format parameters
4-63