Overview
1-6
Paper weights
The DP 100/115/135/155/180 EPS supports the following range
of paper weights:
16–110 pound / 60–200 gsm
Other paper weights should not be used.
NOTE: The equivalent grams per square meter of 20 pound
paper is actually 75 gsm. However, there is no standard 75 gsm
paper. The available stock that is closest in weight to 20 pound
paper is 80 gsm.
Special stocks
The following special stocks can be used with the DP 100/115/
135/155/180 EPS:
•
Labels: Must be the type designed for high-speed printers
and must meet the specifications described in the section
above. Loading instructions are printed on all paper trays.
•
Transparencies: Must be the type designed for high-speed
printers and must meet the specifications described in the
section above. Loading instructions are printed on all paper
trays.
•
Colored paper: Available in a variety of colors, colored paper
has many uses, including calling attention to certain printed
material, separating special sections, or dividing chapters of
a report.
•
Preprinted paper: May be letterhead, forms, or logos. (Refer
to Helpful Facts about Paper to verify that the preprinting inks
used on your stock are the kind formulated for use in laser
printers.)
•
Predrilled paper: Has holes for use in binders or binder
rings. Before loading predrilled paper, fan it to remove any
loose plugs that could cause paper jams.
•
Perforated paper
•
Precut or full tabs
•
Carbonless paper
Operator Guide